Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009FUSION SEL, 3.0 1, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1156 (FRONT SUSPENSION SYSTEM)REMOVAL AND INSTALLATIONSTRUT AND SPRING ASSEMBLYNOTES
2009 Ford Fusion SEL, 3.0 1, FWD
Strut and Spring Assembly: Notes
2009 Ford Fusion SEL, 3.0 1, FWDSECTION Notes
WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | 2B223 | Brake jounce hose clip |
| 2 | 2078 | Brake jounce hose (LH/RH) |
| 3 | 3C293 | Anti-lock brake system (ABS) wheel speed sensor harness bolt |
| 4 | W708990 | Upper stabilizer bar link nut |
| 5 | W711999 | Strut-to-knuckle nuts (2 required) |
| 6 | W711998 | Strut-to-knuckle bolts (2 required) |
| 7 | W701267 | Strut upper bushing nuts (4 required) |
| 8 | 18K001 LH/ 18045 RH | Strut and spring assembly |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.