Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009FUSION SEL, 3.0 1, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1015 (AUTOMATIC TRANSAXLE/TRANSMISSION - AISIN AW21)IN-VEHICLE SERVICINGTRANSAXLE SUPPORT INSULATORNOTES
2009 Ford Fusion SEL, 3.0 1, FWD
Transaxle Support Insulator: Notes
2009 Ford Fusion SEL, 3.0 1, FWDSECTION Notes
WARNING: This page is about a different car, the 2008 Mercury Milan, 2008 Lincoln MKZ, and 2008 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Lifting Bracket, Engine | 303-050 (T70P-6000) | |
| Oil Pan Holding Fixture | 303-1295 | |
| Support Bar, Engine | 303-F072 | |
| Universal Adapter Brackets | 014-0001 |
Material
| Item | Specification |
|---|---|
| Threadlock and Sealer TA-25 |
WSK-M2G351-A5 |
| Item | Part Number | Description |
|---|---|---|
| 1 | W711724 | Transaxle support insulator-to-bracket bolt (2 required) |
| 2 | W709234 | Transaxle insulator-to-frame bolts (4 required) |
| 3 | 6F020 | Transaxle insulator |
| Item | Part Number | Description |
|---|---|---|
| 1 | W711873 | Transaxle insulator through bolt |
| 2 | W711872 | Transaxle insulator through bolt flagnut |
| 3 | W709234 | Transaxle insulator-to-frame bolts |
| 4 | 6F020 | Transaxle insulator |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.