Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Six Month Checks
2009 Ford Fusion SEL, 3.0 1, FWDSECTION Six Month Checks
Check each of the following items at least every 6 months:
- Lap/shoulder belts and seat latches for wear and function
- External mounted spare tire is stowed correctly (tight to body)
- Power steering fluid level
- Washer spray, wiper operation and clean all wiper blades (install new wiper blades as necessary)
- Parking brake for correct operation
- Lubricate all hinges, latches, door check straps and outside locks
- Lubricate upper and lower sliding door tracks (if equipped)
- Clean sliding door contact switches (if equipped)
- Lubricate door rubber weatherstrips
- Clean body and door drain holes
- Safety warning lamps (brake, ABS, air bag, safety belt) for correct operation
- Coolant system fluid level and correct strength
- Battery connections. Clean if necessary
- Clutch fluid level, if equipped
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.