Driver Door Module (DDM)

2009 Ford Fusion SEL, 3.0 1, FWDSECTION Driver Door Module (DDM)

The DDM (if equipped), is located behind the LH front door panel. It controls the memory functions of the exterior driver memory mirror and, in conjunction with the driver seat module (DSM) (located under the driver seat), indirectly controls the memory seat functions. The DDM also controls the lock and unlock functions of the driver door lock actuator on vehicles with memory (seats and mirror) and receives lock/unlock input information from the door lock key cylinder switch and reset information from the driver door lock actuator.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.