Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009EDGE SPORT, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 449 (ENGINE - 5.4L (3V) - F250 & F350)SPECIFICATIONSTORQUE SPECIFICATIONS
2009 Ford Edge Sport, FWD
Torque Specifications
2009 Ford Edge Sport, FWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2006 Ford Pickup and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Valve cover bolts(1) | 10 | - | 89 | ||
| Camshaft bearing cap bolts(1) | - | - | - | ||
| Variable camshaft timing (VCT) sprocket assembly bolts(1) | - | - | - | ||
| Cylinder head temperature sensor (CHT) | 10 | 89 | |||
| Camshaft position (CMP) sensor bolt | 10 | - | 89 | ||
| Crankshaft position (CKP) sensor bolt | 10 | - | 89 | ||
| Connecting rod bolts(1) | - | - | - | ||
| Crankshaft damper pulley bolt(1) | - | - | - | ||
| Crankshaft main bearing bolts (cross-mounted)(1) | - | - | - | ||
| Crankshaft main bearing bolts (vertical)(1) | - | - | - | ||
| Cylinder heads bolts(1) | - | - | - | ||
| Exhaust manifold nuts | 25 | 18 | - | ||
| Exhaust manifold studs | 12 | 9 | - | ||
| Exhaust manifold-to-Y-pipe nuts | 40 | 30 | - | ||
| Accessory drive belt idler pulley bolt | 25 | 18 | - | ||
| Flywheel bolts | 80 | 59 | - | ||
| Engine front cover bolts(1) | - | - | - | ||
| Transmission-to-engine bolts | 48 | 35 | - | ||
| Torque converter-to-flexplate nuts | 35 | 26 | - | ||
| Fuel injection supply manifold bracket bolts | 10 | - | 89 | ||
| Generator upper mounting bracket bolts | 10 | - | 89 | ||
| Generator lower mounting bolts | 25 | 18 | - | ||
| Ignition coil | 6 | - | 53 | ||
| Intake manifold to cylinder head bolts(1) | - | - | - | ||
| Knock sensor (KS) | 20 | 15 | - | ||
| Oil filter | 16 | 12 | - | ||
| Oil filter adapter bolts | 25 | 18 | - | ||
| Oil cooler | 57 | 42 | - | ||
| Front oil level indicator tube bolt | 25 | 18 | - | ||
| Rear oil level indicator tube bolt | 10 | - | 89 | ||
| Oil pan bolts(1) | - | - | - | ||
| Oil pan drain plug | 14 | 10 | - | ||
| Engine oil pressure (EOP) sensor | 14 | 10 | - | ||
| Oil pump bolts | 10 | - | 89 | ||
| Oil pump screen and pickup tube bolts | 10 | - | 89 | ||
| Oil pump screen and pickup tube spacer | 25 | 18 | - | ||
| Oil pump screen and pickup tube spacer bolt | 25 | 18 | - | ||
| Power steering pump bolts | 25 | 18 | - | ||
| Rear main oil seal retainer bolts | 10 | - | 89 | ||
| Spark plugs | 34 | 25 | - | ||
| Thermostat housing bolts | 10 | - | 89 | ||
| Throttle body spacer-to-intake manifold bolts | 10 | - | 89 | ||
| Timing chain guide bolts | 10 | - | 89 | ||
| Intake manifold vacuum tube support bracket nut | 10 | - | 89 | ||
| Timing chain hydraulic tensioner bolts | 25 | 18 | - | ||
| Coolant pump bolts | 25 | 18 | - | ||
| Coolant pump pulley bolts | 25 | 18 | - | ||
| Motor mount-to-cylinder block bolts | 63 | 46 | - | ||
| Degas bottle bracket bolts | 10 | - | 89 | ||
| Canister purge valve bracket nuts | 10 | - | 89 | ||
| Motor mount nuts | 103 | 76 | - | ||
| Engine oil pressure (EOP) sensor | 14 | 10 | - | ||
| Fuel rail bolts | 10 | - | 89 | ||
| Generator bracket bolts | 10 | - | 89 | ||
| Intake manifold bolts(1) | - | - | - | ||
| Transmission cooler line bracket nut | 10 | - | 89 | ||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.