Engine Front Cover: Notes

2009 Ford Edge Sport, FWDSECTION Notes
WARNING: This page is about a different car, the 2006 Ford Pickup and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS REFERENCE

G04646894
Installer, Crankshaft Front Seal
303-335 (T88T-6701-A)
G04646895
Remover, Crankshaft Front Seal
303-107 (T74P-6700-A)
G04646896
Installer, Crankshaft Front Seal
303-635
G04646897
Remover, Crankshaft Vibration Damper
303-009 (T58P-6316-D)
G04646898
Installer, Crankshaft Vibration Damper
303-102 (T74P-6316-B)
MATERIAL SPECIFICATIONS

Item Specification
Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W-20-QSP (in Canada Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12) or equivalent WSS-M2C930-A
Silicone Gasket and Sealant
TA-30
WSE-M4G323-A4
Motorcraft Metal Surface Prep
ZC-31
-
Silicone Gasket Remover
ZC-30
-
Fig 1: Engine Front Cover Replacement Components With Torque Specifications (1 Of 3)
G04646899Courtesy of FORD MOTOR CO.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.