Extension Housing Seal: Notes

2009 Ford Edge Sport, FWDSECTION Notes
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Name Tool Number
GF0000218Courtesy of FORD MOTOR CO.
Slide Hammer 100-001 (T50T-100-A)
GF0000927Courtesy of FORD MOTOR CO.
Remover, Torque Converter Fluid Seal 307-309 (T94P-77001-BH)
GF0000928Courtesy of FORD MOTOR CO.
Installer, Drive Pinion Oil Seal 205-115
GF0000929Courtesy of FORD MOTOR CO.
Installer, Drive Pinion Flange 205-479
GF0000930Courtesy of FORD MOTOR CO.
Installer, Output Shaft Flange 307-404
GF0015480Courtesy of FORD MOTOR CO.
Remover, Output Shaft Flange 307-523
Fig 1: Exploded View Of Extension Housing Seal With Torque Specifications
GF0015481Courtesy of FORD MOTOR CO.
Item Part Number Description
1 W701357 Transmission output shaft flange coupler bolts (4 required)
2 W704971 Transmission crossmember-to-floor pan screws
3 W701357 Transmission output shaft flange nut
4 7089 Transmission output shaft flange
5 7052 Extension housing seal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.