Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009EDGE SPORT, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1560 (AUTOMATIC TRANSMISSION)IN-VEHICLE SERVICINGEXTENSION HOUSING GASKETNOTES
2009 Ford Edge Sport, FWD
Extension Housing Gasket: Notes
2009 Ford Edge Sport, FWDSECTION Notes
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Installer, Drive Pinion Flange | 205-479 | |
| Installer, Output Shaft Flange | 307-404 | |
| Remover, Output Shaft Flange | 307-523 |
| Item | Part Number | Description |
|---|---|---|
| 1 | W701357 | Transmission output shaft flange coupler bolt (4 required) |
| 2 | W705966 | Transmission insulator-to-extension housing center screw |
| 3 | W704971 | Transmission crossmember-to-floor pan screws |
| 4 | W701357 | Transmission output shaft flange nut |
| 5 | 7089 | Transmission output shaft flange |
| 6 | W500311 | Extension housing-to-case screw (7 required) |
| 7 | 7A039 | Extension housing |
| 8 | 7086 | Extension housing gasket |
| 9 | - | Crossmember |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.