Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009EDGE SPORT, FWDREPAIR AND DIAGNOSIS (SINGLE PAGE)EXTERNAL PAGESDIFFERENT CARSECTION 2320 (INTERIOR LIGHTING SYSTEM)
2009 Ford Edge Sport, FWD
Section 2320 (Interior Lighting System)
2009 Ford Edge Sport, FWDSECTION Section 2320 (Interior Lighting System)
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Torque Specifications
- Description And Operation
- Diagnosis And Testing
- Interior Lighting
- Notes
- Principles of Operation
- Inspection and Verification
- DTC Charts
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: The Courtesy Lamps Do Not Illuminate With A Door Open
- Pinpoint Test B: The Courtesy Lamps Do Not Illuminate From The Instrument Panel Dimmer Switch
- Pinpoint Test C: The Interior Courtesy Lamp(s) Are Inoperative
- Pinpoint Test D: The Puddle Lamp(s) Are Inoperative
- Pinpoint Test E: The Luggage Compartment Lamp Is Inoperative/Always On
- Pinpoint Test F: The Interior Courtesy Lamps Stay On Continuously
- Pinpoint Test G: The Puddle Lamps Stay On Continuously
- Pinpoint Test H: All The Demand Lamps Are Inoperative
- Pinpoint Test I: An Individual Demand Lamp Is Inoperative
- Pinpoint Test J: The Battery Saver Does Not Deactivate After Time-Out
- Pinpoint Test K: The Ambient Lighting Is Inoperative - Fusion/Milan
- Pinpoint Test L: The Ambient Lighting Does Not Cycle Through All Color Combinations - Fusion/Milan
- Pinpoint Test M: The Ambient Lighting Is Inoperative - MKZ
- Pinpoint Test N: The Ambient Lighting Does Not Cycle Through All Color Combinations - MKZ
- Pinpoint Test O: The Ambient Lighting Does Not Cycle Through Brightness Settings - MKZ
- Pinpoint Test P: DTC U0140 - Lost Communication With Smart Junction Box (SJB)
- Interior Lighting
- Removal And Installation
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.