Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Torque Specifications Table
2009 Ford Edge Sport, FWDSECTION Torque Specifications Table
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS TABLE
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| ABS module screws - Hybrid(1) | - | - | - | ||
| ABS module screws - Non-hybrid | 2 | - | 18 | ||
| Front brake tube fittings - Hybrid | 20 | - | 177 | ||
| Front brake tube fittings - Non-hybrid | 20 | - | 177 | ||
| Front wheel speed sensor bolt | 23 | 17 | - | ||
| Front wheel speed sensor harness bracket-to-body bolt | 7 | - | 62 | ||
| Hydraulic Control Unit (HCU) bracket bolts | 23 | 17 | - | ||
| HCU bracket-to-frame bolt | 23 | 17 | - | ||
| HCU bracket-to-frame nut | 23 | 17 | - | ||
| HCU bracket-to-frame stud bolt | 23 | 17 | - | ||
| HCU bracket-to- HCU bolt | 9 | - | 80 | ||
| Master cylinder brake tube fittings - Hybrid | 20 | - | 177 | ||
| Master cylinder brake tube fittings - Non-hybrid | 27 | 20 | - | ||
| Rear brake tube fittings - Hybrid | 20 | - | 177 | ||
| Rear brake tube fittings - Non-hybrid | 20 | - | 177 | ||
| Rear wheel speed sensor bolt | 23 | 17 | - | ||
| Rear wheel speed sensor harness bolt - All-Wheel Drive (AWD) | 23 | 17 | - | ||
| Rear wheel speed sensor harness nut - AWD | 23 | 17 | - | ||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.