Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009EDGE SPORT, FWDREPAIR AND DIAGNOSIS (SINGLE PAGE)EXTERNAL PAGESDIFFERENT CARSECTION 1746 (REAR DISC BRAKE SYSTEM)SPECIFICATIONSTORQUE SPECIFICATIONS
2009 Ford Edge Sport, FWD
Torque Specifications
2009 Ford Edge Sport, FWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2009 Ford RV Cutaway, 2009 Ford Econoline, 2009 Ford E450 Super Duty, and 2009 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Axle vent | 17 | - | 150 |
| Brake caliper anchor plate bolts | 225 | 166 | - |
| Brake caliper flow bolts | 40 | 30 | - |
| Brake caliper guide pin bolts | 61 | 45 | - |
| Brake caliper support bracket bolts | 175 | 129 | - |
| Brake flexible hose bracket bolt | 25 | 18 | - |
| Brake tube fitting | 18 | - | 159 |
| Caliper bleed screw | 11 | - | 97 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.