Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009CUTAWAY E250, 4R70WREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONRESET PROCEDURESMAINTENANCE REMINDER LIGHT (RESET PROCEDURES)MAINTENANCE SERVICE REMINDER (OVERHEAD WARNING LIGHTS)MAINTENANCE SERVICE REMINDER RESET PROCEDURE
2009 Ford Cutaway E250, 4R70W
Maintenance Service Reminder Reset Procedure
2009 Ford Cutaway E250, 4R70WSECTION Maintenance Service Reminder Reset Procedure
- One or more of the 7 overhead lights will turn on after about 358 days or 4800 miles to indicate routine service should be performed.
- To reset the light, hold the SELECT and UNITS buttons on the trip computer for 5 seconds. The service interval light will be illuminated, and then turn off after about 4 seconds.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.