Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISGENERAL INFORMATIONDTC INDEXENGINE COOLING SYSTEM DTCS
2007 Ford Fusion SEL, 2.3 Z, Standard
Engine Cooling System DTCS
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Engine Cooling System DTCS
ENGINE COOLING SYSTEM POWERTRAIN CONTROL MODULE (PCM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| P0217 | Engine Coolant Overtemperature Condition | Go to Pinpoint Test B . |
| P1285 | Cylinder Head Overtemperature Condition | Go to Pinpoint Test B . |
| P1299 | Cylinder Head Overtemperature Protection Active | Go to Pinpoint Test B . |
| P0125 | Insufficient Coolant Temp For Closed Loop Fuel Control | Go to Pinpoint Test C . |
| P0128 | Coolant Thermostat (Coolant Temp Below Thermostat Regulating Temperature) | Go to Pinpoint Test C . |
| P0480 P0481 P0482 |
Fan 1, 2 or 3 Control Circuit, Respectively | REFER to the Introduction - Gasoline Engines . |
| All Other DTCs | - | REFER to the Introduction - Gasoline Engines . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.