Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 5 (ENGINE - 3.0L (4V))IN-VEHICLE SERVICINGUPPER INTAKE MANIFOLDNOTES
2007 Ford Fusion SEL, 2.3 Z, Standard
Upper Intake Manifold: Notes
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Notes
WARNING: This page is about a different variant/trim than selected.
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Wiring harness retainer (part of 12B637) |
| 2 | 14A464 | Manifold absolute pressure (MAP) sensor electrical connector (part of 12B637) |
| 3 | - | PCV hose clamp (part of 6K817) |
| 4 | 6K817 | PCV hose |
| 5 | 392984 | Brake booster vacuum hose clamp |
| 6 | 2C053 | Brake booster vacuum hose |
| 7 | 2C053 | Throttle body (TB) electrical connector (part of 12B637) |
| 8 | - | EGR tube nut (part of 9D477) |
| 9 | 14A464 | EGR valve electrical connector (part of 12B637) |
| 10 | - | Vacuum tube |
| 11 | - | Vacuum tube retainer bolt |
| 12 | - | Wiring harness retainer (part of 12B637) |
| Item | Part Number | Description |
|---|---|---|
| 13 | W709168 | TB bolt (4 required) |
| 14 | 9F991 | TB |
| 15 | 9E936 | TB gasket |
| 16 | 9Y450 | Upper intake manifold bolt (8 required) |
| 17 | 9424 | Upper intake manifold |
| 18 | - | Clamp (part of 9D661) |
| 19 | 9D661 | Evaporative emissions (EVAP) tube |
| 20 | 9H486 | Upper intake manifold gasket (6 required) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.