Valve Train Components - Exploded View

2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Valve Train Components - Exploded View
WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Valve Train Components With Specifications
GF0002398Courtesy of FORD MOTOR CO.
Item Part Number Description
1 N808305 Rocker arm bolt (12 required)
2 6A528 Rocker arm pivot (12 required)
3 6564 Rocker arm (12 required)
4 6565 Push rod (12 required)
5 - Tappet guide plate bolt (4 required) (part of 6K564)
6 6K564 Tappet guide plate (2 required)
7 6500 Valve tappet (12 required)
8 6518 Valve spring retainer key (24 required)
9 6514 Valve spring retainer (12 required)
10 6513 Valve spring (12 required)
11 6A517 Valve stem seal (12 required)
  1. For additional information, refer to the procedures in this article.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.