Engine Support Insulators: Notes

2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Notes
WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Name Tool Number
GF0002444
3-Bar Engine Support 303-F073
GF0000160
Lifting Bracket, Engine 303-050 (T70P-6000)
Material

Item Specification
Threadlock 262
TA-26
WSK-M2G351-A6
Fig 1: Identifying Engine Support Insulators With Specifications
GF0002445Courtesy of FORD MOTOR CO.
Item Part Number Description
1 W711403 LH engine support insulator through bolt
2 W711282 LH engine support insulator bolts (2 required)
3 6B032 LH engine support insulator
4 W710384 RH engine support insulator nuts (2 required)
5 6D047 RH engine support insulator washer
6 W711282 RH engine support insulator bolts (2 required)
7 6038 RH engine support insulator
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.