Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Programming Adjustable Pedal Positions
An adjustable pedal position can be stored at any time.
Programming adjustable pedal positions can be accomplished by the following:
- To store the adjustable pedal position to memory, move the pedals to the preferred position using the adjustable pedal switch. Press the memory SET switch, activating the memory SET switch light emitting diode (LED). Within 5 seconds (before the LED goes out) select memory position 1 or 2.
- If no memory switch input is received within the 5-second time limit, the operation is aborted and the memory SET switch LED is turned OFF. If one of the following inputs is received during the 5-second programming limit, the operation is aborted and the memory SET switch LED is turned OFF:
- Adjustable pedal switch
- Power driver seat switch
- Exterior mirror control switch
- Memory SET switch
To program the remote keyless entry (RKE) transmitter, refer to REMOTE KEYLESS ENTRY TRANSMITTER PROGRAMMING .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.