Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 539 (BRAKE SYSTEM - GENERAL INFORMATION)DIAGNOSIS AND TESTINGBRAKE SYSTEMBRAKE CALIPERS
2007 Ford Fusion SEL, 2.3 Z, Standard
Brake Calipers
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Brake Calipers
WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
Inspect the brake calipers for the following:
- Brake fluid leaks. For additional information, refer to BRAKE SYSTEM LEAK CHECK .
- Boots and seals for tears or cracks.
- Caliper pistons for binding and corrosion.
- Guide pins for correct operation. For additional information, refer to BRAKE CALIPER GUIDE PINS .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.