Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 295 (BODY PANEL SYSTEM - FRONT END BODY PANELS)SPECIFICATIONSTORQUE SPECIFICATIONS
2007 Ford Fusion SEL, 2.3 Z, Standard
Torque Specifications
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Torque Specifications
WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Air compressor bracket nuts | 8 | - | 71 |
| Battery tray bolt | 12 | 9 | - |
| Fender front bolts | 12 | 9 | - |
| Fender inner rear bolt | 28 | 21 | - |
| Fender lower brace bolt | 12 | 9 | - |
| Fender-to-radiator support bolt | 12 | 9 | - |
| Fender radiator grille opening panel front bolt | 12 | 9 | - |
| Fender splash shield bolt | 12 | 9 | - |
| Ground wire bolts | 5 | - | 44 |
| Hood hinge-to-hood bolts | 12 | 9 | - |
| Lower front fender bolts | 12 | 9 | - |
| Powertrain control module (PCM) bolt | 10 | - | 89 |
| Radiator grille opening panel bolt | 12 | 9 | - |
| Rear fender brace bolt | 28 | 21 | - |
| Rear fender bolt | 28 | 21 | - |
| Rocker panel fender bolts | 28 | 21 | - |
| Splash shield bolts | 12 | 9 | - |
| Upper rear fender bolts | 43 | 32 | - |
| Wiper pivot arm nut | 35 | 26 | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.