Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1604 (INTERIOR LIGHTING SYSTEM)DESCRIPTION AND OPERATIONINTERIOR LIGHTINGNOTES
2007 Ford Fusion SEL, 2.3 Z, Standard
Interior Lighting: Notes
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Notes
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Smart Junction Box (SJB) is also known as the Generic Electronic Module (GEM).
The SJB controls all of the interior lighting functions. The interior lighting system consists of the following components:
- SJB
- Instrument panel dimmer switch
- Interior/map lamps
- Luggage compartment lamp
- Vanity mirror lamps
- Puddle lamps (if equipped)
- Scuff plate lamps (if equipped)
- Door ajar switches
- Luggage compartment lid ajar switch
- Ambient lighting module (Fusion/Milan) (if equipped)
- Ambient lighting switch (part of the traction control switch for Fusion/Milan) (if equipped)
- Ambient lighting select switch (MKZ (if equipped))
- Ambient lighting dimmer switch (MKZ (if equipped))
- Interior Lighting Control Module (ILCM) (MKZ)
The interior lighting system consists of up to 3 subsystems:
- Courtesy lamps
- Demand lamps
- Ambient lighting (if equipped)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.