Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1531 (REAR DRIVE HALFSHAFTS)SPECIFICATIONS
2007 Ford Fusion SEL, 2.3 Z, Standard
Section 1531 (Rear Drive HALFSHAFTS): Specifications
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Specifications
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL
| Item | Specification | Fill Capacity |
|---|---|---|
| Motorcraft SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL (US); CXY-80W90-1L (Canada) |
WSP-M2C197-A | 1.15L (2.43 pt) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| ABS wheel speed sensor bolt | 23 | 17 |
| Shock absorber lower bolt | 115 | 85 |
| Tie-rod bracket nuts | 90 | 66 |
| Toe link bracket nut | 90 | 66 |
| Upper arm bolt | 110 | 81 |
| Wheel hub nut | 255 | 188 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.