SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1492 (ENGINE CONTROLS - DIAGNOSTIC METHODS (HYBRID))SCAN TOOL SET-UP AND FUNCTIONALITYINTERNATIONAL STANDARDS ORGANIZATION (ISO) 14229 DTC DESCRIPTIONS
2007 Ford Fusion SEL, 2.3 Z, Standard

International Standards Organization (ISO) 14229 DTC Descriptions

2007 Ford Fusion SEL, 2.3 Z, StandardSECTION International Standards Organization (ISO) 14229 DTC Descriptions
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The ISO 14229 DTC is a set of common requirements for diagnostic systems. The scan tool displays a failure type and a status type with the DTC. The types display additional information on the scan tool for the condition that set the DTC. For a list of failure type descriptions, refer to POWERTRAIN CONTROL SOFTWARE , INTERNATIONAL STANDARDS ORGANIZATION (ISO) 14229 DIAGNOSTIC TROUBLE CODE (DTC) DESCRIPTIONS .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.