Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1486 (COMPONENT TESTING (EXCEPT HYBRID))INTRODUCTIONMASTER WINDOW CONTROL SWITCH - FUSION/MILAN WITHOUT PASSENGER ONE TOUCHCOMPONENT TESTING PROCEDURE
2007 Ford Fusion SEL, 2.3 Z, Standard
Component Testing Procedure
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Component Testing Procedure
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MASTER WINDOW CONTROL SWITCH, FUSION/MILAN WITHOUT PASSENGER ONE TOUCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Switch lock | 2, C537a and 2, C537b | Unlock | Closed circuit |
| Lock | Open circuit | ||
| Left front window circuit | 2, C537a and 1, C537a | Up | Closed circuit |
| 2, C537a and 5, C537a | Down | Closed circuit | |
| 2, C537a and 7, C537a | One-Touch Up/Down | Closed circuit | |
| Right front window circuit | 2, C537a and 8, C537a | Up | Closed circuit |
| 2, C537a and 4, C537a | Down | Closed circuit | |
| 7, C537b and 8, C537a 7, C537b and 4, C537a |
Rest | Closed circuit | |
| Left rear window circuit | 2, C537a and 5, C537b | Up | Closed circuit |
| 2, C537a and 1, C537b | Down | Closed circuit | |
| 7, C537b and 5, C537b 7, C537b and 1, C537b |
Rest | Closed circuit | |
| Right rear window circuit | 2, C537a and 8, C537b | Up | Closed circuit |
| 2, C537a and 4, C537b | Down | Closed circuit | |
| 7, C537b and 8, C537b 7, C537b and 4, C537b |
Rest | Closed circuit |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.