Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1476 (ENGINE EMISSION CONTROL SYSTEM)REMOVAL AND INSTALLATIONEXHAUST GAS RECIRCULATION (EGR) SYSTEM COMPONENTS - EXPLODED VIEW
2007 Ford Fusion SEL, 2.3 Z, Standard
Exhaust Gas Recirculation (EGR) System Components - Exploded View
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Exhaust Gas Recirculation (EGR) System Components - Exploded View
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | N807309 | Intake manifold shield bolt (2 required) |
| 2 | 9F460 | Intake manifold shield |
| 3 | 14A464 | EGR system module electrical connector |
| 4 | 9D475 | EGR system module |
| 5 | 9D476 | EGR system module gasket |
| 6 | 9E499 | EGR system module vacuum connector |
| 7 | - | EGR system module retaining bolts (2 required) |
| Item | Part Number | Description |
|---|---|---|
| 1 | - | EGR system module tube-to-exhaust manifold fitting (part of 9D477) |
| 2 | 9D477 | EGR system module tube |
| 3 | - | EGR system module tube-to-EGR system module fitting (part of 9D477) |
- For additional information, refer to the appropriate procedures.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.