Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1453 (POWER STEERING SYSTEM)REMOVAL & INSTALLATIONSTEERING GEARNOTES
2007 Ford Fusion SEL, 2.3 Z, Standard
Steering Gear: Notes
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Notes
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
Material
| Item | Specification |
|---|---|
| MERCON® V Automatic Transmission Fluid XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) |
MERCON® V |
| Item | Part Number | Description |
|---|---|---|
| 1 | 3504 | Steering gear |
| 2 | W707972 | Steering gear studs (2 required) |
| 3 | W520214 | Outer tie-rod end nut |
| 4 | W707492 | Steering gear nuts (2 required) |
| 5 | 3A719 | Pressure line |
| 6 | 3A713 | Return line |
| 7 | W704331 | Steering line clamp plate bolt |
| 8 | N803257 | O-ring seal |
| 9 | N803256 | O-ring seal |
| 10 | W710821 | Steering column shaft-to-steering gear coupling bolt |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.