Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1436 (FRONT SUSPENSION)REMOVAL & INSTALLATIONWHEEL KNUCKLENOTES
2007 Ford Fusion SEL, 2.3 Z, Standard
Wheel Knuckle: Notes
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Notes
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | W710298 | Lower ball joint nut |
| 2 | 3K170 RH/ 3K171 LH | Wheel knuckle |
| 3 | 3B438 | Stabilizer bar link |
| 4 | W520213 | Stabilizer bar link lower nut |
| 5 | W710298 | Upper ball joint nut |
| 6 | W520214 | Outer tie-rod end nut |
| 7 | W520213 | Stabilizer bar link upper nut |
| 8 | - | Wheel speed sensor wiring harness retainer (part of 2C204) |
| Item | Part Number | Description |
|---|---|---|
| 9 | W707589 | Brake caliper anchor plate bolts (2 required) |
| 10 | - | Brake caliper and anchor plate assembly |
| 11 | 1125 | Brake disc |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.