Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1436 (FRONT SUSPENSION)REMOVAL & INSTALLATIONSTABILIZER BARNOTES

2007 Ford Fusion SEL, 2.3 Z, Standard

Stabilizer Bar: Notes

2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Notes

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Stabilizer Bar With Torque Specifications

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	W520213	Lower stabilizer bar link nut (2 required)
2	W520213	Stabilizer bar bracket nut (4 required)
3	4A407	Stabilizer bar bracket (2 required)
4	5482	Stabilizer bar

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.