Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1323 (FRONT SUSPENSION)REMOVAL AND INSTALLATIONSTRUT AND SPRING ASSEMBLYNOTES
2007 Ford Fusion SEL, 2.3 Z, Standard
Strut and Spring Assembly: Notes
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Notes
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
PART DESCRIPTION CHART
| Item | Part Number | Description |
|---|---|---|
| 1 | 2B223 | Brake jounce hose clip |
| 2 | 2078 | Brake jounce hose (LH/RH) |
| 3 | W709072 | Wheel speed sensor harness bolt |
| 4 | W715135 | Upper stabilizer bar link nut |
| 5 | W711999 | Strut-to-knuckle nuts (2 required) |
| 6 | W711998 | Strut-to-knuckle bolts (2 required) |
| 7 | W701267 | Strut upper bushing nuts (4 required) |
| 8 | 18K001 LH/18045 RH | Strut and spring assembly |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.