Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1240 (INFORMATION SYSTEM AND ENTERTAINMENT SYSTEM)DIAGNOSIS AND TESTINGINFORMATION AND ENTERTAINMENT SYSTEMSYMPTOM TABLE - SYNC SYSTEM

2007 Ford Fusion SEL, 2.3 Z, Standard

Symptom Table - SYNC System

2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Symptom Table - SYNC System

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

SYMPTOM TABLE - SYNC SYSTEM

Condition	Possible Sources	Action
The SYNC system is completely inoperative	Audio system concern Communication network concern Customer error Customer device Accessory Protocol Interface Module (APIM)	Go To PINPOINT TEST Z .
Unable to pair Bluetooth device	Incompatible Bluetooth device Customer error Customer Bluetooth device APIM	Go To PINPOINT TEST AA .
An individual Bluetooth device feature is inoperative	Customer device compatibility	NOTE: If a Bluetooth device is able to pair with the SYNC system, there are no concerns with the APIM . INSTRUCT the customer to review the device compatibility list on the SyncMyRide website . Not all phone features are available through the SYNC system. This is normal operation.
The Universal Serial Bus (USB) port is inoperative/does not operate correctly	Customer USB device USB cable and port APIM	Go To PINPOINT TEST AB .
The steering wheel controls are inoperative/do not operate correctly	Wiring, terminals or connectors Clockspring Steering wheel controls ACM APIM (without navigation only)	Go To PINPOINT TEST Q .
The audio input jack is inoperative/does not operate correctly	Wiring, terminals or connectors Audio input jack APIM	Go To PINPOINT TEST R .
Poor quality/distorted/no sound while in SYNC mode	Wiring, terminals or connectors APIM ACM	Go To PINPOINT TEST H .
The SYNC system audible prompts are inoperative/do not operate correctly	Customer setting Wiring, terminals or connectors ACM APIM	NOTE: The audible prompts include the Text-To-Speech (TTS) feature, voice prompts, and ringtones. Go To PINPOINT TEST AC .
During a phone call, no incoming audio is heard in the vehicle	Customer setting Wiring, terminals or connectors ACM APIM	Go To PINPOINT TEST AC .
Voice recognition is inoperative/does not operate correctly	Wiring, terminals or connectors Microphone (part of auto-dimming interior mirror) Steering wheel controls ACM (if equipped with navigation) APIM	Go To PINPOINT TEST V .
During a phone call, no outgoing audio is heard on the outside device	Wiring, terminals or connectors Microphone (part of auto-dimming interior mirror) APIM	Go To PINPOINT TEST V .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.