Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1191 (ELECTRONICALLY CONTROLLED CONTINUOUSLY VARIABLE TRANSMISSION (ECVT))SPECIFICATIONSTORQUE SPECIFICATIONS TABLE
2007 Ford Fusion SEL, 2.3 Z, Standard
Torque Specifications Table
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Torque Specifications Table
WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS TABLE
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Battery Junction Box (BJB) bolt | 10 | - | 89 |
| Battery Junction Box (BJB) nut | 10 | - | 89 |
| Drain plug | 40 | 30 | - |
| Fill plug | 40 | 30 | - |
| Manual control lever nut | 12 | - | 106 |
| Roll restrictor bolts | 90 | 66 | - |
| Transaxle support insulator nuts | 90 | 66 | - |
| Transmission Range (TR) sensor bolts | 5 | - | 44 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.