Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1136 (ENGINE - 6.8L)SPECIFICATIONSTORQUE SPECIFICATIONS
2007 Ford Fusion SEL, 2.3 Z, Standard
Torque Specifications
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Torque Specifications
WARNING: This page is about a different car, the 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| A/C compressor mounting bolts | 25 | 18 | - |
| A/C condenser bracket bolts | 12 | 9 | - |
| A/C condenser tube (small) | 18 | 13 | - |
| A/C condenser tube (large) | 39 | 29 | - |
| A/C suction tube nut | 47 | 35 | - |
| Accessory drive belt idler pulley bolt | 25 | 18 | - |
| Accessory drive belt tensioner bolts | 25 | 18 | - |
| Air cleaner assembly bolts | 7 | - | 62 |
| Balance shaft bearing cap bolts and studs | 10 | - | 89 |
| Battery feed cable nut | 8 | - | 71 |
| Camshaft bearing cap bolts | 10 | - | 89 |
| Camshaft position (CMP) sensor bolt | 10 | - | 89 |
| Camshaft sprocket boltsa | - | - | - |
| Clean air tube clamps | 4 | - | 35 |
| Connecting rod boltsa | - | - | - |
| Coolant pump bolts | 25 | 18 | - |
| Coolant pump pulley bolts | 25 | 18 | - |
| Crankshaft main bearing bolts (cross mounted)a | - | - | - |
| Crankshaft main bearing bolts (vertical)a | - | - | - |
| Crankshaft position (CKP) sensor bolt | 10 | - | 89 |
| Crankshaft pulley bolta | - | - | - |
| Crankshaft rear seal retainer plate boltsa | - | - | - |
| Cylinder block drain plug | 24 | 18 | - |
| Cylinder head temperature (CHT) sensor | 26 | 19 | - |
| Cylinder heads boltsa | - | - | - |
| Dual converter Y-pipe nuts | 40 | 30 | - |
| Engine cooling fan clutch nut | 133 | 98 | - |
| Engine front cover boltsa | - | - | - |
| Engine oil pressure (EOP) switch | 18 | 13 | - |
| Engine support insulator-to-crossmember nuts | 90 | 66 | - |
| Engine support insulator-to-cylinder block bolts | 80 | 59 | - |
| Engine wiring harness bracket nut | 25 | 18 | - |
| Exhaust manifold nutsa | - | - | - |
| Exhaust manifold studs | 12 | 9 | - |
| Fan shroud bolts | 6 | - | 53 |
| Flexplate boltsa | - | - | - |
| Flexplate inspection plate bolts | 34 | 25 | - |
| Fuel charging wiring harness retainer bolts | 10 | - | 89 |
| Fuel rail bolts | 10 | - | 89 |
| Fuel rail pressure and temperature sensor support bracket bolts | 10 | - | 89 |
| Generator mounting bolts | 25 | 18 | - |
| Generator support bracket bolts | 10 | - | 89 |
| Ground cable nut | 10 | - | 89 |
| Heater return tube studs | 40 | 30 | - |
| Hood latch bolts | 12 | 9 | - |
| Ignition coil bolts | 6 | - | 53 |
| Intake manifold-to-cylinder head boltsa | - | - | - |
| Knock sensor (KS) bolt | 20 | 15 | - |
| Oil cooler threaded insert | 58 | 43 | - |
| Oil fill tube support bracket bolt | 10 | - | 89 |
| Oil filter | 16 | 12 | - |
| Oil filter adapter bolt | 25 | 18 | - |
| Oil filter adapter nut | 48 | 35 | - |
| Oil filter adapter stud | 12 | 9 | - |
| Oil level indicator support bracket-to-cylinder head bolt | 10 | - | 89 |
| Oil level indicator support bracket-to-front cover nut | 25 | 18 | - |
| Oil pan boltsa | - | - | - |
| Oil pan drain plug | 23 | 17 | - |
| Oil pump boltsa | - | - | - |
| Oil pump screen cover and tube bolts | 10 | - | 89 |
| Oil pump screen and pickup tube spacer | 25 | 18 | - |
| Oil pump screen and pickup tube-to-spacer bolt | 25 | 18 | - |
| Power steering pump bolts | 25 | 18 | - |
| Power steering reservoir bolts | 20 | 15 | - |
| Radiator bracket mounting bolts | 20 | 15 | - |
| Radio frequency interference capacitor | 25 | 18 | - |
| Spark plugs | 18 | 13 | - |
| Throttle body (TB) adapter-to-intake manifold boltsa | - | - | - |
| Timing chain guide bolts | 10 | - | 89 |
| Timing chain hydraulic tensioner bolts | 25 | 18 | - |
| Torque converter nuts | 40 | 30 | - |
| Transmission cooler tube nut | 25 | 18 | - |
| Transmission cooler tubes bracket nut | 30 | 22 | - |
| Transmission fluid indicator tube support bracket-to-cylinder head nut | 28 | 21 | - |
| Transmission fluid indicator tube support bracket nut | 10 | - | 89 |
| Transmission-to-engine bolts | 47 | 35 | - |
| Upper and lower radiator support bracket bolts | 20 | 15 | - |
| Valve cover boltsa | - | - | - |
a Refer to the procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.