Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1121 (STEERING COLUMN)DISASSEMBLY AND ASSEMBLYSTEERING COLUMNNOTES
2007 Ford Fusion SEL, 2.3 Z, Standard
Steering Column: Notes
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Notes
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Steering Column Locking Lever Tool | Shop Fabricated |
Material
| Item | Specification |
|---|---|
| Premium Long-Life Grease XG-1-C or XG-1-K (US); CXG-1-C (Canada) |
ESA-M1C75-B |
| Item | Part Number | Description |
|---|---|---|
| 1 | 14A664 | Clockspring |
| 2 | 3530 | Upper steering column shroud |
| 3 | 3518 | Steering column bearing sleeve |
| 4 | 3517 | Steering column upper bearings |
| 5 | 3511 | Ignition lock cylinder housing |
| 6 | 13K359 | Multi-function switch |
| 7 | N808114 | Pin |
| 8 | N805857 | Steering column release lever pin |
| 9 | 3D544 | Steering column release lever |
| 10 | 3F609 | Tilt wheel handle and shank |
| 11 | 7361 | Column shift selector lever plunger |
| 12 | 7210 | Selector lever |
| 13 | 3D657 | Steering column shaft |
| 14 | 7B071 | Transmission control selector lever plunger spring |
| 15 | 7G357 | Selector lever pin |
| 16 | 7212 | Transmission column shift selector tube |
| 17 | N806582 | Ignition lock cylinder screw |
| 18 | 7C464 | Transmission control selector lever spring clip |
| 19 | 7E400 | Selector lever tube bushing clamp |
| 20 | 3F527 | Lever assembly (manual transmission) |
| 21 | 3F530 | Pin (manual transmission) |
| 22 | 3F752 | Brake shift interlock solenoid |
| 23 | 7335 | Selector lever socket bushing |
| 24 | 7A216 | Transmission shift selector position insert |
| 25 | 7302 | Transmission selector lever arm and support |
| 26 | 7E395 | Shift cable and bracket |
| 27 | 7D282 | Transmission control selector, lower |
| 28 | 3E691 | Steering column shift lock pawl |
| 29 | 7W441 | Selector lever pin |
| 30 | 3676 | Steering column instrument panel bracket |
| 31 | 3D681 | Steering column lower bearing retainer |
| 32 | 3517 | Steering column lower bearing sleeve |
| 33 | 3L539 | Steering column lower bearing tolerance ring |
| 34 | 3C674 | Steering column lower bearing spring |
| 35 | 3C131 | Sensor ring |
| 36 | 3518 | Steering column lower bearing |
| 37 | N806423 | Steering column retaining nuts |
| 38 | 14A163 | Wiring harness retainer |
| 39 | 3F723 | Steering actuator housing |
| 40 | 3B663 | Steering column lock lever pin |
| 41 | 11572 | Ignition switch |
| 42 | 3D655 | Steering column position spring |
| 43 | 3D653 | LH steering column locking lever |
| 44 | 3B768 | Steering column position lock spring |
| 45 | 3B662 | RH steering column locking lever |
| 46 | 3E715 | Lower steering column lock actuator |
| 47 | 3E696 | Steering column lock spring |
| 48 | 3E691 | Steering column shaft lock pawl |
| 49 | 3E723 | Upper steering column lock lever actuator |
| 50 | 3E695 | Steering column lock cam |
| 51 | 3D656 | Steering column tilt flange bumper |
| 52 | 14A163 | Wiring harness retainer |
| 53 | 391727 | Shroud screws |
| 54 | 3530 | Steering column shroud |
| 55 | 3E717 | Ignition lock cylinder gear |
| 56 | 3E700 | Ignition lock cylinder bearing |
| 57 | 3C610 | Ignition lock cylinder bearing retainer |
| 58 | 11582 | Ignition lock cylinder |
| 59 | 3L539 | Steering column upper bearing tolerance ring |
| 60 | 3520 | Steering column upper bearing spring |
| 61 | 3C610 | Steering column upper bearing snap ring |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.