Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Radio Frequency Interference Suppression Equipment
| Item | Part Number | Description |
|---|---|---|
| 1 | 18801 | Radio ignition interference capacitor (4.6L) |
| 2 | 18801 | Radio ignition interference capacitor (5.4L) |
| 3 | 19A095 | Ground strap (from generator to cowl) |
| 4 | 19A095 | Ground strap (to cowl from generator) |
| 5 | 19A095 | Radio frequency interference suppression bond |
The radio suppression equipment reduces interference transmitted through the radio speakers by the engine ignition and electrical systems. When installing any radio suppression equipment components, make sure that a good contact is made at all connections. Remove any paint or dirt from between a component and its ground. Tighten all connectors and screws securely according to torque specifications.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.