Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1069 (POWER STEERING SYSTEM)REMOVAL AND INSTALLATIONSTEERING GEARNOTES
2007 Ford Fusion SEL, 2.3 Z, Standard
Steering Gear: Notes
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Notes
WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Separator, Ball Joint | 204-592 |
| Item | Part Number | Description |
|---|---|---|
| 1 | W705606 | Outer tie-rod end nuts (2 required) |
| 2 | 3A130 | Outer tie-rod end |
| 3 | - | Pin-type retainers |
| 4 | 3C567 | Steering gear shield (3.0L (4V) engines and Hybrid vehicles only) |
| 5 | W713065 | Steering column coupling-to-steering gear bolt |
| 6 | W712338 | Steering gear bolts (2 required) |
| 7 | 3A500 | Steering gear |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.