Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMENGINE CONTROLS - POWERTRAIN DTC CHARTS AND DESCRIPTIONS (EXCEPT DIESEL & HYBRID)DTC DIAGNOSISP0603 - INTERNAL CONTROL MODULE KEEP ALIVE MEMORY (KAM) ERROR
2007 Ford Fusion SEL, 2.3 Z, Standard
P0603 - Internal Control Module Keep Alive Memory (KAM) Error
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION P0603 - Internal Control Module Keep Alive Memory (KAM) Error
P0603 - INTERNAL CONTROL MODULE KEEP ALIVE MEMORY (KAM) ERROR
| Description: | Indicates the powertrain control module (PCM) has experienced an internal memory concern. However, there are external items that can cause this DTC. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | If KAPWR is interrupted to the PCM because of a battery or PCM disconnect, this DTC can be generated on the first power-up. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | refer to PINPOINT TEST QB . | - | refer to PINPOINT TEST QB . | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.