Symptom Chart

2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Symptom Chart
Symptom Chart

Condition Possible Sources Action
  • No communication with the smart junction box (SJB) module
  • Circuitry
  • SJB
  • All power windows are inoperative - MKZ
  • Fuse
  • Circuitry
  • Window control switch
  • SJB
  • All power windows are inoperative - Fusion, Milan
  • Circuitry
  • Window control switch
  • SJB
  • A single power window is inoperative - MKZ, LH front
  • Fuse
  • Circuitry
  • LH front window control switch
  • LF power window motor
  • SJB
  • A single power window is inoperative - Fusion, Milan, LH front
  • Circuitry
  • LH front window control switch
  • LF power window motor
  • SJB
  • A single power window is inoperative - MKZ, RH front
  • Fuse
  • Circuitry
  • LH or RH front window control switch
  • RH front power window motor
  • A single power window is inoperative - MKZ, LH or RH rear
  • Fuse
  • Circuitry
  • LH or RH front window control switch
  • LH or RH rear power window motor
  • A single power window is inoperative - Fusion, Milan, RH front, LH or RH rear
  • Circuitry
  • LH or RH front window control switch
  • LH or RH rear window control switch
  • RH front, LH or RH rear power window motor
  • The one-touch up/down feature is inoperative - MKZ, LH or RH front
  • Circuitry
  • LH or RH front power window motor
  • LH or RH front window control switch
  • LH or RH front motor not initialized
  • Battery power was lost while LH or RH front window was operating
  • The one-touch up/down feature is inoperative - Fusion, Milan, LH front
  • LH front window control switch
  • INSTALL a new LH front window control switch. REFER to Window Control Switch . TEST the system for normal operation.
  • The global open function is inoperative/does not operate correctly - MKZ
  • RKE transmitters
  • Circuitry
  • SJB
  • Door window motors not initialized
  • The defrost system is inoperative
  • Fuse(s)
  • Circuitry
  • Rear window defrost grid
  • Heating ventilation air conditioning (HVAC) module - electronic manual temperature control (EMTC), or if equipped, HVAC module - electronic automatic temperature control (EATC)
  • Antenna module (Early build only)
  • SJB
  • Battery junction box (BJB)
  • The defrost system will not shut off automatically
  • Circuitry
  • SJB
  • Heating ventilation air conditioning (HVAC) module - electronic manual temperature control (EMTC), or if equipped, HVAC module - electronic automatic temperature control (EATC)
  • The delayed accessory is inoperative/does not operate correctly
  • Fuse
  • Circuitry
  • SJB circuit breaker
  • SJB
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.