Torque Specifications

2007 Ford Focus SES, 4D Sedan, StandardSECTION Torque Specifications
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
A/C compressor mounting bolts 25 18 -
A/C compressor manifold bolt 21 15 -
A/C clutch disc and hub bolt 13 10 -
Air conditioning (peanut) fitting nut 8 - 71
Suction accumulator bracket nut 7 - 62
Suction accumulator bracket bolts 7 - 62
Lower radiator support bolts 24 18 -
High pressure switch 10 - 89
In-vehicle crossbeam bolts 25 18 -
In-vehicle crossbeam bracket bolts 25 18 -
RH inner heater core and evaporator core housing nut 7 - 62
LH inner heater core and evaporator core housing nut 9 - 80
Outer heater core and evaporator core housing nuts 7 - 62
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.