Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FOCUS SES, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 862 (ENGINE CONTROLS - POWERTRAIN DTC CHARTS AND DESCRIPTIONS - (HYBRID))DTC DIAGNOSISP1A0C - HYBRID POWERTRAIN CONTROL MODULE - ENGINE DISABLED
2007 Ford Focus SES, 4D Sedan, Standard
P1A0C - Hybrid Powertrain Control Module - Engine Disabled
2007 Ford Focus SES, 4D Sedan, StandardSECTION P1A0C - Hybrid Powertrain Control Module - Engine Disabled
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P1A0C - HYBRID POWERTRAIN CONTROL MODULE - ENGINE DISABLED
| Description: | This is an informational DTC and is set as the result of limited operating strategy (LOS) or failure mode effects management (FMEM) operating strategy that maintains limited vehicle function in the event of the powertrain control module (PCM), transaxle control module (TCM), traction battery control module (TBCM), or component concern. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | The circuit DTCs can be accompanied by the informational DTCs, and should be diagnosed first. An informational DTC without a circuit DTC may or may not indicate the actual concern and should be diagnosed as a symptom. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | refer to PINPOINT TEST QE . | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.