Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FOCUS SES, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1542 (POWER BRAKE ACTUATION -- BRAKE BOOSTER)SPECIFICATIONSTORQUE SPECIFICATIONS
2007 Ford Focus SES, 4D Sedan, Standard
Torque Specifications
2007 Ford Focus SES, 4D Sedan, StandardSECTION Torque Specifications
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS TABLE
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| A/C compressor bolts | 25 | 18 | - | ||
| A/C compressor bracket bolts | 25 | 18 | - | ||
| Auxiliary coolant pump bracket bolts | 25 | 18 | - | ||
| Brake booster nuts (1) | - | - | - | ||
| Ground cable bolt | 12 | - | 106 | ||
| Motor Electronics Cooling System (MECS) coolant pump bolts | 20 | - | 177 | ||
| MECS expansion tank nut and bolt | 12 | - | 106 | ||
| PCM bracket nuts | 11 | - | 97 | ||
| Push rod jam nut | 17 | - | 150 | ||
| Remote brake fluid reservoir nuts | 7 | - | 62 | ||
| Transmission fluid level indicator tube bolt | 8 | - | 71 | ||
| Transmission selector lever cable bracket nuts | 23 | 17 | - | ||
| Vacuum pump bracket bolt | 25 | 18 | - | ||
| Vacuum pump bracket nut | 25 | 18 | - | ||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.