Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FOCUS SES, 4D SEDAN, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)EXTERNAL PAGESDIFFERENT CARSECTION 1128 (AUTOMATIC TRANSMISSION - 4R70E/W, 4R75E/W)DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIESPUMP AND INTERMEDIATE CLUTCH PISTONNOTES
2007 Ford Focus SES, 4D Sedan, Standard
Pump And Intermediate Clutch Piston: Notes
2007 Ford Focus SES, 4D Sedan, StandardSECTION Notes
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Installer, Front Pump Fluid Seal | 307-014 (T63L-77837-A) |
| Item | Part Number | Description |
|---|---|---|
| 1 | 7902 | Torque converter |
| 2 | 7A248 | Front pump O-ring |
| 3 | N605789-S101 | Bolt |
| 4 | - | Pump body assembly |
| 5 | N605787-S1000 | Front pump support bolt |
| 6 | 7D014 | No. 1 pump support thrust washer |
| 7 | 7D020 | Reverse clutch cylinder seal |
| 8 | 7D019 | Forward clutch cylinder seal |
| 9 | 7F222 | Intermediate clutch piston return spring |
| 10 | 7E005 | Intermediate clutch piston |
| 11 | 7A108 | Pump support |
| 12 | - | Pump outer gerotor gear |
| 13 | - | Pump inner gerotor gear |
| 14 | 7A136 | Pump gasket |
| 15 | - | Pump bushing |
| 16 | 7A248 | Pump inner seal |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.