Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FOCUS SES, 4D SEDAN, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCETESTING & DIAGNOSISENGINE CONTROLS - POWERTRAIN DTC CHARTS AND DESCRIPTIONS (EXCEPT DIESEL & HYBRID)DTC DIAGNOSISP0316 - MISFIRE DETECTED ON STARTUP (FIRST 1000 REVOLUTIONS)
2007 Ford Focus SES, 4D Sedan, Standard
P0316 - Misfire Detected On Startup (First 1000 Revolutions)
2007 Ford Focus SES, 4D Sedan, StandardSECTION P0316 - Misfire Detected On Startup (First 1000 Revolutions)
P0316 - MISFIRE DETECTED ON STARTUP (FIRST 1000 REVOLUTIONS)
| Description: | DTC P0316 is set in addition to any type B misfire DTC which occurs in the first 1,000 revolution test interval following engine start. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | Freeze frame data and the DTC P03xx are also stored, indicating which cylinder the misfire occurred. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | - | - | refer to PINPOINT TEST HD . | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.