Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FOCUS SES, 4D SEDAN, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMESUN ROOF/T-TOP/CONVERTIBLE TOPSUNROOFGENERAL PROCEDURESROOF OPENING PANEL MOTOR INITIALIZATIONUPDATING ROOF OPENING PANEL MOTOR INITIALIZATION
2007 Ford Focus SES, 4D Sedan, Standard
Updating Roof Opening Panel Motor Initialization
2007 Ford Focus SES, 4D Sedan, StandardSECTION Updating Roof Opening Panel Motor Initialization
WARNING:
The roof opening panel anti-trap function will not operate during the roof opening panel motor initialization procedure. Make sure that the roof opening panel opening is free of all foreign material. Failure to follow these instructions may result in personal injury.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.