Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FIVE HUNDRED 2WD V6-3.0L VIN 1REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSBODY CONTROL MODULESERVICE AND REPAIRREMOVAL AND REPLACEMENT
2007 Ford Five Hundred 2WD V6-3.0L VIN 1
Removal and Replacement
2007 Ford Five Hundred 2WD V6-3.0L VIN 1SECTION Removal and Replacement
DRIVER SEAT MODULE (DSM)
Special Tool(s)
Removal and Installation
1. Remove the driver seat.
2. If equipped, position the climate controlled seat module aside.
3. Disconnect the DSM electrical connectors.
4. Remove the 2 rivets and the DSM.
5. To install, reverse the removal procedure.
- Use the special tool to install the 2 rivets.
Special Tool(s):
Special Tool(s)
Removal and Installation
1. Remove the driver seat.
2. If equipped, position the climate controlled seat module aside.
3. Disconnect the DSM electrical connectors.
4. Remove the 2 rivets and the DSM.
5. To install, reverse the removal procedure.
- Use the special tool to install the 2 rivets.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.