Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007EXPLORER SPORT TRAC 2WD V8-4.6L VIN 8REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTECHNICAL SERVICE BULLETINS
2007 Ford Explorer Sport Trac 2WD V8-4.6L VIN 8
Computers and Control Systems: Technical Service Bulletins
2007 Ford Explorer Sport Trac 2WD V8-4.6L VIN 8SECTION Technical Service Bulletins
- Customer Interest
- Engine Controls - Idle Fluctuation/DTC's P0505/P0506
- A/T Controls - MIL ON/Various A/T Solenoid DTC's
- A/T - Loss Of 2nd/3rd/5th Gears/Ratio DTC's Set
- Engine Controls - MIL ON/DTC P0456 Stored In ECM
- A/T, Engine Controls - Low Speed Driveline Bump
- Engine Controls - Hard Start/Rough Idle After Hot Soak
- Engine, A/T Control - Various Driveability Issues
- A/T - 'Wrench Lamp' ON/Multiple DTC's Set In TCM
- Charging System - DTC P0340/P0344/P0345/P0349
- Instruments - Inoperative/No Start Condition
- Engine - MIL ON/DTC's P2000-P2008/P2015/P2020 Set
- ABS/TCS/RCS - Warning Lamp ON/DTC C1440 Set
- By Symptom
- Abnormal wear/deterioration
- Customer Interest
- Engine Controls - Idle Fluctuation/DTC's P0505/P0506
- A/T Controls - MIL ON/Various A/T Solenoid DTC's
- A/T - Loss Of 2nd/3rd/5th Gears/Ratio DTC's Set
- Engine Controls - MIL ON/DTC P0456 Stored In ECM
- A/T, Engine Controls - Low Speed Driveline Bump
- Engine Controls - Hard Start/Rough Idle After Hot Soak
- Engine, A/T Control - Various Driveability Issues
- A/T - 'Wrench Lamp' ON/Multiple DTC's Set In TCM
- Charging System - DTC P0340/P0344/P0345/P0349
- Instruments - Inoperative/No Start Condition
- Engine - MIL ON/DTC's P2000-P2008/P2015/P2020 Set
- ABS/TCS/RCS - Warning Lamp ON/DTC C1440 Set
- Driveability
- False instrument warning light/gauges
- Leaks
- No shift/Incorrect gear engagement
- Starting problems
- All Technical Service Bulletins
- Engine Controls - Idle Fluctuation/DTC's P0505/P0506
- A/T Controls - MIL ON/Various A/T Solenoid DTC's
- A/T - Loss Of 2nd/3rd/5th Gears/Ratio DTC's Set
- Engine Controls - MIL ON/DTC P0456 Stored In ECM
- A/T, Engine Controls - Low Speed Driveline Bump
- Engine Controls - Hard Start/Rough Idle After Hot Soak
- Engine, A/T Control - Various Driveability Issues
- A/T - 'Wrench Lamp' ON/Multiple DTC's Set In TCM
- Charging System - DTC P0340/P0344/P0345/P0349
- Ignition System - System Diagnosis
- Instruments - Inoperative/No Start Condition
- Engine - MIL ON/DTC's P2000-P2008/P2015/P2020 Set
- ABS/TCS/RCS - Warning Lamp ON/DTC C1440 Set
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.