Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007ESCAPE BASE, 2.3 Z, FWD, AUTOMATICREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSAUTOMATIC TRANSMISSION - CD4EDISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIESPUMP ASSEMBLYDISASSEMBLY
2007 Ford Escape Base, 2.3 Z, FWD, Automatic
Pump Assembly: Disassembly
2007 Ford Escape Base, 2.3 Z, FWD, AutomaticSECTION Disassembly
- Remove and discard the 7 pump support seal rings from the pump support.
- Remove the 6 pump support bolts.
- Separate the pump support and body assembly.
- Remove the pump support.
- Remove the pump body separator plate gasket.
- Remove the pump body separator plate.
- Remove the pump body.
- Remove and discard the pump seal.
- Remove the pump drive gear assembly.
- Remove the pump drive gear insert.
- Remove the pump drive gear.
- Remove the pump driven gear.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.