Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007ESCAPE BASE, 2.3 Z, FWD, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 5 (ENGINE CONTROLS - POWERTRAIN DTC CHARTS AND DESCRIPTIONS - (HYBRID))DTC DIAGNOSISP2123 - THROTTLE/PEDAL POSITION SENSOR/SWITCH D CIRCUIT HIGH
2007 Ford Escape Base, 2.3 Z, FWD, Automatic
P2123 - Throttle/Pedal Position Sensor/Switch D Circuit High
2007 Ford Escape Base, 2.3 Z, FWD, AutomaticSECTION P2123 - Throttle/Pedal Position Sensor/Switch D Circuit High
WARNING: This page is about a different variant/trim than selected.
P2123 - THROTTLE/PEDAL POSITION SENSOR/SWITCH D CIRCUIT HIGH
| Description: | The accelerator pedal position (APP) sensor 1 is out of self-test range high. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | An APP1 sensor PID reading may indicate a concern. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | refer to PINPOINT TEST DK . | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.