Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007ESCAPE BASE, 2.3 Z, FWD, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 916 (ELECTRONIC ENGINE CONTROL SYSTEM - 2.3L - (EXCEPT HYBRID))REMOVAL AND INSTALLATIONIDLE AIR CONTROL (IAC) VALVENOTES
2007 Ford Escape Base, 2.3 Z, FWD, Automatic
Idle Air Control (IAC) Valve: Notes
2007 Ford Escape Base, 2.3 Z, FWD, AutomaticSECTION Notes
WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | W500410 | Upper snow shield-to-intake manifold screw |
| 2 | W710378 | Upper snow shield-to-intake manifold pin-type retainer |
| 3 | 9E776 | Upper snow shield |
| 4 | W505165 | Lower snow shield-to-intake manifold screws (2 required) |
| 5 | 9E776 | Lower snow shield |
| 6 | 14A464 | Idle air control (IAC) valve electrical connector |
| 7 | W500214 | IAC valve bolts (2 required) |
| 8 | 9F715 | IAC valve |
| 9 | - | IAC valve gasket |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.