Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007ESCAPE BASE, 2.3 Z, FWD, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 852 (INFORMATION CENTER (F250-F550))GENERAL PROCEDURESCOMPASS ZONE ADJUSTMENT
2007 Ford Escape Base, 2.3 Z, FWD, Automatic
Compass Zone Adjustment
2007 Ford Escape Base, 2.3 Z, FWD, AutomaticSECTION Compass Zone Adjustment
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- The factory zone setting is set to Zone 8. Check the map to verify the correct compass zone setting for your geographic location.
- Turn the ignition switch to the RUN position.
- From the info menu, press and hold the SETUP and RESET buttons simultaneously until the message center shows the current zone setting.
- Release the SETUP and RESET buttons. Press the SETUP button until the correct zone setting is displayed.
- To exit the zone setting mode, and to lock in the change, press and release the RESET button.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.