Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007ESCAPE BASE, 2.3 Z, FWD, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 688 (ENGINE - 4.6L (2V) - F-150)
2007 Ford Escape Base, 2.3 Z, FWD, Automatic
Section 688 (Engine - 4.6L (2V) - F-150)
2007 Ford Escape Base, 2.3 Z, FWD, AutomaticSECTION Section 688 (Engine - 4.6L (2V) - F-150)
WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnostic Tests
- In-Vehicle Servicing
- Intake Manifold
- Valve Cover - LH
- Valve Cover - RH
- Crankshaft Pulley
- Crankshaft Front Seal
- Engine Front Cover
- Timing Drive Components
- Valve Train Components - Exploded View
- Camshaft
- Camshaft Roller Follower
- Valve Springs
- Valve Seals
- Hydraulic Lash Adjuster
- Exhaust Manifold - RH
- Exhaust Manifold - LH
- Engine Lubrication Components - Exploded View
- Oil Pan
- Oil Pump
- Oil Pump Screen and Pickup Tube
- Oil Filter Adapter
- Oil Level Indicator and Tube
- Engine Oil Pressure (EOP) Switch
- Flexplate or Flywheel and Crankshaft Rear Seal - Exploded View
- Flexplate
- Crankshaft Rear Seal
- Crankshaft Rear Seal with Retainer Plate
- Engine Support Insulators
- Removal
- Disassembly
- Disassembly And Assembly Of Subassemblies
- Assembly
- Installation
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.