Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Exterior Lighting
The exterior lighting consists of the following:
- Headlamps
- Front park/turn signal lamps
- Rear lamps
- High-mounted stoplamp
- Fog lamps
- Parking lamps
- License plate lamps
- Reversing lamps
- Side marker lamps
- Side turn signal lamps
- Stoplamp switch
- Fog lamp switch
- Multifunction switch
- Light sensor
The headlamp switch is integrated into the multifunction switch. For additional information, refer to STEERING COLUMN SWITCHES .
The DRL system operates the low beam headlamps at a reduced intensity. The smart junction box (SJB) supplies pulse width modulated (PWM) voltage to the low beam headlamps when the following conditions are met:
- The headlamp switch is not in the HEADLAMPS ON position.
- The ignition switch is in the RUN position.
- The parking brake control is released.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.